TOM-Audio CT-04 C cable tester for XLR, jack, Speakon, Phono/RCA, Chinch, DIN, banana plugs or S type sockets

The mobile, versatile cable tester enables quick and convenient continuity cable testing for different types of cables. With the 9-way switch and the LED display could test plug connection and current flow of cables for each several conductor. A 9 V battery supplies the cable tester with power. The battery can checked with LED display at the 9-way switch. The cable tester can check cables with different plugs (e.g. XLR to jack). If GND (ground) glows, there is a connection with the corresponding contacts and the chassis. Cables with banana plugs, sensors or cables without plugs can test by LED display and bleep under the 9-way switch. The cable tester has a robust metal chassis.

Technical Specifications of Cable Tester:

• Dimensions: 190 x 110 x 50 mm
• Weight: 783 g (without battery)
• Unit front side with short manual and pin configuration for jack, Speakon and Phono, bilingual (German/English) manual and original packing with English manual 

Following Plugs Testable:

• 3.5 and 6.3 mm jack, Mono (TS) and Stereo (TRS) jack
• 3-pin and 5-pin XLR cable (XLR-M to XLR-F)
• Phono/RCA plug (Chinch)
• 4-pin and 8-pin Speakon plug
• 4-pin S Type socket
• 3-pin, 5-pin, 7-pin and 8-pin DIN plug
• CAT5 plug
• Banana plug
• Cables without plugs

Configuration:

6.3 mm mono (¼" TS) jack to 6.3 mm mono  (¼" TS) jack:
1 sleeve to 1 sleeve, 3 ring 
2 tip to 2 tip
3 ring to 1 sleeve, 3 ring (shorted with sleeve)

6.3 mm stereo (¼" TRS) jack to 6.3 mm sereo (¼" TRS)  jack:
1 sleeve to 1 sleeve
2 tip to 2 tip
3 ring to 3 ring

XLR balanced to XLR balanced:
pin 1 to pin 1
pin 2 to pin 2
pin 3 to pin 3

XLR unbalanced to XLR unbalanced:
pin 1 to pin 1, pin 3
pin 2 to pin 2
pin 3 to pin 1, pin 3

6.3 mm mono (¼" TS) jack to XLR unbalanced:
1 sleeve to pin 1, pin 3
2 tip to pin 2
3 ring to pin 1, pin 3 (shorted with sleeve)

6.3 mm stereo (¼" TRS) jack to XLR balanced:
1 sleeve to pin 1
2 tip to pin 2
3 ring to pin 3